LogoJET Terra UVx25FB & Luna UVx18FB Help

October 5, 2023

Printer Properties:

If you click on the Properties button next to the Printer Model window in the Imaging Configuration screen, the following control panel for this printer will be displayed:

The Printer Mode Options tab has the following settings.

Print Mode: Select the resolution for printing. The available print modes are 720x360, 720x720, 720x1080, and 720x1440.
Inkset: Choose to print with CMYK or CMYKW.
Direction: Print in one direction for the best quality (Uni-directional) or print in both directions with a higher speed (Bi-directional).
Dot Type: Choose to print with a fixed dot or variable dot.
Color Dot Size: Select the size of the dots to use during printing. Only available when Fixed dot type is selected above.
Spot Color Dot Size: Select the size of the dots to use when printing white. Only available when CMYKW and Fixed dot type is selected.
Double Strike: Selecting this feature will double the amount of ink being laid down.
Masking Mode: Specify the type of masking effect to use during printing. Options are 'No Mask', 'Fine Mask', and 'Gradient Mask'.
Destination Folder: Specify where to save the output files.

White Auto-Generation:

The Auto-Generations tab has the following settings.

Auto-Generation: Available with the CMYKW inkset.
- No Auto-Generation: White is not printed unless specified through a spot color replacement.
- Auto-Generate ink from traced areas: The White will be applied only to the traced areas that have been created using the Trace tab in the main SoftRIP interface.
- Auto-Generate the entire page: Prints White on the entire image.
- Auto-Generate where other inks are used: Prints White on all non-zero pixels(marked areas). In addition, a "choke" or "spread" may be applied to the area.
  Note: A choke shrinks the White in relation to the printed area.
  Note: A spread expands the White in relation to the printed area.
- Ink Density: Set percentage of ink to be used for the White. Can be set from 10% to 100%.

For further information on the setup and operation of this device, please consult your user's manual.

[ Wasatch Home ]